plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 100AL NC010 DUPONT USA
Delrin®
Thin walled products,Fitness equipment
High rigidity,High hardness,Thermal stability,high viscosity,heat-resisting
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodDUPONT USA/100AL NC010
EmissionVDA275<8.00 mg/kg
thermal performanceTest ConditionTest MethodDUPONT USA/100AL NC010
AnnealingTemperature160 °C
AnnealingTime-Optional30.0 min/mm
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B163 °C
1.8MPa,UnannealedISO 75-2/A97.0 °C
Linear coefficient of thermal expansionTDISO 11359-21.1E-04 cm/cm/°C
MDISO 11359-21.1E-04 cm/cm/°C
Melting temperatureISO 11357-3178 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/100AL NC010
Bending modulusISO 1782800 Mpa
Nominal tensile fracture strainISO 527-245 %
Tensile creep modulus1hrISO 899-12700 Mpa
1000hrISO 899-11500 Mpa
Tensile modulusISO 527-23000 Mpa
Tensile strainYieldISO 527-218 %
tensile strengthYieldISO 527-270.0 Mpa
Physical propertiesTest ConditionTest MethodDUPONT USA/100AL NC010
densityISO 11831.40 g/cm³
melt mass-flow rate190°C/2.16kgISO 11332.5 g/10min
Shrinkage rateMDISO 294-42.0 %
TDISO 294-41.8 %
impact performanceTest ConditionTest MethodDUPONT USA/100AL NC010
Charpy Notched Impact Strength23°CISO 179/1eA9.0 kJ/m²
-30°CISO 179/1eA7.0 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A8.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU170 kJ/m²
23°CISO 179/1eU250 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/100AL NC010
Burning rate1.00mmISO 379526 mm/min
FMVSS flammabilityFMVSS302B
Fogging-G-valuecondensateISO 64521E-04 g
UL flame retardant rating0.8mmIEC 60695-11-10,-20HB
1.5mmIEC 60695-11-10,-20HB
1.5mmUL 94HB
0.8mmUL 94HB

Contact Us

Get App

Top