plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 9330-759 SABIC INNOVATIVE NANSHA
LEXAN™ 
--
Flame retardant,Toughening,UV resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Ball Pressure TestH358/30ISO 2039-190.0 Mpa
thermal performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Ball Pressure Test125°CIEC 60695-10-2通过
Hot deformation temperature0.45MPa,Unannealed,100mmSpan12ISO 75-2/Be135 °C
1.8MPa,Unannealed,3.20mmASTM D648120 °C
1.8MPa,Unannealed,6.40mmASTM D648124 °C
0.45MPa,Unannealed,3.20mmASTM D648134 °C
1.8MPa,Unannealed,100mmSpan12ISO 75-2/Ae124 °C
Linear coefficient of thermal expansionMD:-40to40°CASTME8316.7E-05 cm/cm/°C
TD:-40to40°CASTME8316.7E-05 cm/cm/°C
MD:23to80°CISO 11359-27.2E-05 cm/cm/°C
TD:23to80°CISO 11359-27.7E-05 cm/cm/°C
RTIUL 746120 °C
RTI ElecUL 746125 °C
RTI ImpUL 746115 °C
Vicat softening temperature--ASTMD152513142 °C
--ISO 306/B50140 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Bending modulus50.0mmSpan5ASTM D7902070 Mpa
--6ISO 1782200 Mpa
bending strengthYield,50.0mmSpan5ASTM D79088.0 Mpa
--6,7ISO 17885.0 Mpa
elongationYieldISO 527-2/506.0 %
Yield4ASTM D6386.0 %
Break4ASTM D638130 %
BreakISO 527-2/50130 %
Tensile modulus--3ASTM D6382100 Mpa
--ISO 527-2/12100 Mpa
tensile strengthYieldISO 527-2/5055.0 Mpa
BreakISO 527-2/5060.0 Mpa
Break4ASTM D63861.0 Mpa
Yield4ASTM D63858.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Compared to the anti leakage trace indexIEC 60112PLC 3
CTIUL 746PLC 3
Dielectric strength3.20mm,in OilIEC 60243-116 KV/mm
3.20mm,inOilASTM D14917 KV/mm
Dissipation factor50HzIEC 602501E-03
60HzASTM D1502.4E-03
50HzASTM D1502.4E-03
60HzIEC 602501E-03
1MHzASTMD1508.5E-03
High arc combustion indexHAIUL 746PLC 0
Hot wire ignitionHWIUL 746PLC 1
Surface resistivityIEC 60093>1.0E+15 ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
melt mass-flow rate300°C/1.2kgASTM D123810 g/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 11339.00 cm3/10min
Outdoor applicabilityUL 746Cf1
Shrinkage rateTD:3.20mmInternal Method0.40-0.80 %
MD:3.20mmInternal Method0.40-0.80 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.15 %
Saturation,23°CISO 620.35 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Charpy Notched Impact Strength23°CISO 179/1eA75 kJ/m²
-30°CISO 179/1eA60 kJ/m²
Dart impact23°C,TotalEnergyASTM D376352.0 J
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
23°CISO 179/1eU无断裂
Suspended wall beam without notch impact strength23°C9ISO 180/1U无断裂
-30°C9ISO 180/1U无断裂
23°C11Internal Method1100 J/m
flammabilityTest ConditionTest MethodSABIC INNOVATIVE NANSHA/9330-759
Burning wire flammability index1.0mmIEC 60695-2-12960 °C
Extreme Oxygen IndexISO 4589-235 %
Hot filament ignition temperature1.0mmIEC 60695-2-13825 °C
UL flame retardant rating3.0mmUL 945VA
0.8mmUL 94V-1
1.5mmUL 94V-0

Contact Us

Get App

Top