Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66/6 TSM-30 EMS-CHEMIE SWITZERLAND
Grilon®
Automotive Applications,Profile
Glass fiber reinforced,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
Continuous use temperature | ---- 33 | ISO 2578 | 100 to 120 °C |
---- 44 | Internal Method | 220 °C | |
Hot deformation temperature | 1.8 MPa,Unannealed264 psi, Unannealed | ISO 75-2/A | 110 °C |
8.0 MPa,Unannealed1160 psi, Unannealed | ISO 75-2/C | 70 °C | |
Linear coefficient of thermal expansion | MDFlow | ISO 11359-2 | 0.000080 1/℃ |
TDTransverse | ISO 11359-2 | 0.000080 1/℃ | |
Melting temperature | ISO 11357-3 | 260 °C |
flame retardant performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
Flammability level | UL 94 | HB |
mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 170 Mpa | |
Tensile modulus | ISO 527-2 | 5800 Mpa | |
Tensile strain | BreakBreak | ISO 527-2 | 3 % |
tensile strength | BreakBreak | ISO 527-2 | 75 Mpa |
Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 27 KV/mm | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | 10000000000000 ohms·cm |
Physical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
density | ISO 1183 | 1.37 g/cm³ | |
Shrinkage rate | MDFlow | ISO 294-4 | 0.8 % |
TDAcross Flow | ISO 294-4 | 0.8 % | |
Water absorption rate | Saturation,23℃Saturation, 73°F | ISO 62 | 6.5 % |
Equilibrium,23℃,50% RHEquilibrium, 73°F, 50% RH | ISO 62 | 2 % |
impact performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSM-30 |
---|---|---|---|
Charpy Notched Impact Strength | 23℃23°C | ISO 179/1eA | 5 kJ/m² |
-30℃-30°C | ISO 179/1eA | 5 kJ/m² | |
Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | 45 kJ/m² |
-30℃-30°C | ISO 179/1eU | 35 kJ/m² |