Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC CFR7431 NA8E061TNS SABIC INNOVATIVE NANSHA
LEXAN™
Electronic and Electrical Applications,Plastic bag,Lighting applications,Electrical appliances
Non chloro non bromine fl
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 64.0 J |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 8.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 9.0 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2350 Mpa | |
| elongation | 屈服 | ASTM D638 | 6.0 % |
| tensile strength | 断裂 | ASTM D638 | 55.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2/50 | 6.0 % |
| tensile strength | 断裂 | ISO 527-2/50 | 53.0 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 2450 Mpa |
| Tensile modulus | ASTM D638 | 2520 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 66.0 Mpa |
| elongation | 断裂 | ASTM D638 | 55 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 107 Mpa |
| ISO 178 | 101 Mpa | ||
| Flexural modulus | ISO 178 | 2450 Mpa | |
| tensile strength | 屈服 | ASTM D638 | 67.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2/50 | 56 % |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| Dissipation Factor | 1.10GHz | ASTMES7-83 | 5.7E-03 |
| dielectric constant | 1.10GHz | ASTMES7-83 | 2.79 |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| transmissivity | 3000µm | 内部方法 | >88.0 % |
| 2000µm | 内部方法 | >89.0 % | |
| 1000µm | 内部方法 | >90.0 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | 5VA |
| Burning wire flammability index | 1.2mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 1.2mm | IEC 60695-2-13 | 850 °C |
| UL flame retardant rating | 1.0mm | UL 94 | V-1 |
| 1.2mm | UL 94 | V-0 | |
| 0.40mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.55-0.75 % |
| Outdoor applicability | UL 746C | f1 | |
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 9.00 cm3/10min |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.60-0.80 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.10 % |
| 饱和,23°C | ISO 62 | 0.13 % | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 10 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CFR7431 NA8E061TNS |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,100mmSpan，HDT | ISO 75-2/Be | 131 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 6.7E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 131 °C |
| vicat | ASTM D152510 | 136 °C | |
| Heat distortion temperature | 1.8MPa,Unannealed,100mmSpan，HDT | ISO 75-2/Ae | 120 °C |
| RTI Str | UL 746 | 125 °C | |
| vicat | -- | ISO 306/B120 | 139 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 6.7E-05 cm/cm/°C |
| vicat | -- | ISO 306/B50 | 137 °C |
| Linear coefficient of thermal expansion | MD：23到80°C | ISO 11359-2 | 7.7E-05 cm/cm/°C |
| RTI Imp | UL 746 | 120 °C | |
| Linear coefficient of thermal expansion | TD：23to80°C | ISO 11359-2 | 7.9E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 120 °C |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
| RTI Elec | UL 746 | 125 °C |
Contact Us
Get App
Top