Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LS-2020 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Electrical applications,Automotive Applications
wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2020 |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 85.0 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2500 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 100 % | |
| tensile strength | ASTM D638/ISO 527 | 53.0 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2020 |
|---|---|---|---|
| characteristic | 耐磨损性能良好 | ||
| notes | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2020 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.50-0.70 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.12 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LS-2020 |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 142 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000070 mm/mm.℃ |
Contact Us
Get App
Top