Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Hylon® N1240MGHL25UV Entec Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 6.0 kJ/m² |
| hardness | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| Rockwell hardness | M级 | ISO 2039-2 | 98 |
| Mechanical properties | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2 | 130 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 2.0 % |
| Flexural modulus | ISO 178 | 8700 MPa | |
| bending strength | ISO 178 | 180 MPa |
| flammability | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| Shrinkage rate | MD：3.18mm | ISO 294-4 | 0.40to0.70 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.80 % |
| density | ISO 1183 | 1.49 g/cm³ |
| Thermal performance | Test Condition | Test Method | Entec Polymers/Hylon® N1240MGHL25UV |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 229 °C |
Contact Us
Get App
Top