Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT D201G30 SHINKONG TAIWAN
SHINITE®
Home appliance components
Chemical resistance,heat-resisting,Electrical performance,Filler: Glass fiber reinf,30% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 118 |
| thermal performance | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 208 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.1E-05 cm/cm/°C |
| Melting temperature | DSC | 224 °C |
| mechanical properties | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 8480 Mpa | |
| bending strength | ASTM D790 | 189 Mpa | |
| compressive strength | ASTM D695 | 157 Mpa | |
| elongation | Break | ASTM D638 | 2.2 % |
| Tensile modulus | ASTM D638 | 11900 Mpa | |
| tensile strength | ASTM D638 | 125 Mpa |
| Electrical performance | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 2.20 | |
| Dielectric strength | ASTM D149 | 29 KV/mm | |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| density | ASTM D792 | 1.52 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 0.30-1.4 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.070 % |
| impact performance | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 91 J/m |
| flammability | Test Condition | Test Method | SHINKONG TAIWAN/D201G30 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |