Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 1533GFU KEP KOREA
KEPAMID®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| Rockwell hardness | R计秤 | ISO 2039-2 | 120 |
| Mechanical properties | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 260 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 8.800 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ISO 178 | 260 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| Flexural modulus | ISO 178 | 9500 Mpa | |
| elongation at break | ASTM D638/ISO 527 | 2.0 % | |
| Rockwell hardness | ASTM D785 | 120 | |
| tensile strength | ASTM D638/ISO 527 | 180 kg/cm²(MPa)[Lb/in²] | |
| ISO 527-2 | 180 Mpa |
| Electrical performance | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 3.80 |
| Physical properties | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.38 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 6 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 1.25 % |
| flammability | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| physical property | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | 内部方法 | 0.30-0.50 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 1.3 % |
| Thermal performance | Test Condition | Test Method | KEP KOREA/1533GFU |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 220 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 210 °C | |
| melting temperature | 220 ℃（℉） |
Contact Us
Get App
Top