Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PPO GFN3-701 SABIC INNOVATIVE THAILAND

NORYL™

Lawn equipment,Garden equipment,Non specific food,Outdoor applications,Electrical field,Electronic field,Architectural application field,Liquid handling,Electrical appliances,Engine hood parts,Medical supplies,Nursing supplies,Plastic bag,Automotive External Parts,Lighting applications

enhance,Glass fiber reinforced,Hydrolysis resistance

Plastic Datasheets

hardness	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Rockwell hardness	L计秤	ASTM D785	108

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	137 °C
		0.45MPa,未退火,3.20mm	ASTM D648	142 °C
		0.45MPa,未退火,6.40mm	ASTM D648	158 °C
		1.8MPa,未退火,6.40mm	ASTM D648	138 °C
		0.45MPa,Unannealed,64.0mmSpan	ISO 75-2/Bf	143 °C
		1.8MPa,未退火,3.20mm	ASTM D648	137 °C
Linear coefficient of thermal expansion	TD：-40到40°C	ASTME831	6.2E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD：-40到40°C	ASTME831	3.1E-05 cm/cm/°C
RTI Elec		UL 746	90.0 °C
RTI Imp		UL 746	90.0 °C
RTI Str		UL 746	90.0 °C
Vicat softening temperature	--	ISO 306/B120	147 °C
Vicat softening temperature		--	ISO 306/B50	143 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Bending modulus	50.0mm跨距5	ASTM D790	8000 Mpa
			ISO 178	8710 Mpa
		100mmSpan4	ASTM D790	7170 Mpa
bending strength		ISO 178	183 Mpa
		Yield,100mmSpan4	ASTM D790	162 Mpa
		屈服,50.0mm跨距5	ASTM D790	180 Mpa
elongation	断裂	ASTM D638	2.0 %
Tensile modulus		ISO 527-2/1	8740 Mpa
Tensile modulus			ASTM D638	9150 Mpa
Tensile strain	断裂	ISO 527-2	1.8 %
tensile strength	断裂	ASTM D638	116 Mpa
tensile strength		断裂	ISO 527-2	117 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Arc resistance		ASTM D495	PLC7
Compared to the anti leakage trace index	CTI	UL 746	PLC 4
Dielectric constant	50Hz	ASTM D150	2.93
Dielectric constant		60Hz	ASTM D150	2.93
Dielectric strength	3.20mm,inOil	ASTM D149	22 KV/mm
Dissipation factor	60Hz	ASTM D150	9E-04
Dissipation factor		50Hz	ASTM D150	9E-04
High arc combustion index	HAI	UL 746	PLC 4
High voltage arc tracing rate	HVTR	UL 746	PLC 3
Hot wire ignition	HWI	UL 746	PLC 4

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
melt mass-flow rate	300°C/5.0kg	ASTM D1238	8.7 g/10min
Melt Volume Flow Rate (MVR)	300°C/5.0kg	ISO 1133	7.82 cm3/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.10-0.40 %
Water absorption rate	24hr	ASTM D570	0.060 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	12 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	12 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	47 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	39 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	32 kJ/m²
Suspended wall beam without notch impact strength		-30°C	ISO 180/1U	36 kJ/m²

flammability	Test Condition	Test Method	SABIC INNOVATIVE THAILAND/GFN3-701
Extreme Oxygen Index		ASTM D2863	26 %
UL flame retardant rating	1.5mm	UL 94	HB

Get App

Top