Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC H-2000R MITSUBISHI THAILAND
IUPILON™
Automotive sector、Medical packaging、Electronic field、Electrical field
High mobility
UL
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | MITSUBISHI THAILAND/H-2000R |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | NoBreak |
Mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/H-2000R |
---|---|---|---|
Tensile modulus | ISO 527-2 | 2400 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 120 % | |
bending strength | ISO 178 | 93.0 Mpa | |
Flexural modulus | ISO 178 | 2300 Mpa | |
Tensile strain | 屈服 | ISO 527-2 | 6.6 % |
tensile strength | 屈服 | ISO 527-2 | 62.0 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/H-2000R |
---|---|---|---|
dielectric strength | 1.00mm | IEC 60243-1 | 31 KV/mm |
Volume resistivity | IEC 60093 | 3E+16 ohms·cm | |
relative permittivity | 100Hz | IEC 60250 | 3.10 |
Dissipation Factor | 100Hz | IEC 60250 | 6E-04 |
dielectric strength | 3.00mm | IEC 60243-1 | 18 KV/mm |
relative permittivity | 1MHz | IEC 60250 | 3.10 |
Surface Resistivity | IEC 60093 | 6E+15 ohms | |
Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 2 |
Dissipation Factor | 1MHz | IEC 60250 | 9E-03 |
physical property | Test Condition | Test Method | MITSUBISHI THAILAND/H-2000R |
---|---|---|---|
Shrinkage rate | TD:3.20mm | 0.50-0.70 % | |
Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 20.0 cm3/10min |
Shrinkage rate | 吸水率(饱和,23°C) | 0.24 % | |
MD:3.20mm | 0.50-0.70 % | ||
melt mass-flow rate | 300°C/1.2kg | ISO 1133 | 22 g/10min |
Thermal performance | Test Condition | Test Method | MITSUBISHI THAILAND/H-2000R |
---|---|---|---|
Heat distortion temperature | 0.45MPa,未退火,HDT | ISO 75-2/B | 138 °C |
1.8MPa,未退火,HDT | ISO 75-2/A | 124 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6.5E-05 cm/cm/°C |
TD | ISO 11359-2 | 6.6E-05 cm/cm/°C |
Contact Us
Get App
Top