Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Resinoid 2002-4P Resinoid Engineering Corporation
--
Applications and electrical components in the automotive field
Filler, Resinoid, Resinoid from the United States
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 48 J/m |
| hardness | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| Rockwell hardness | E计秤 | ASTM D785 | 71 |
| M级 | ASTM D785 | 106 |
| Electrical performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| dielectric strength | ASTM D149 | 11 kV/mm | |
| arc resistance | ASTM D495 | 180 sec |
| Mechanical properties | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| bending strength | 屈服 | ASTM D790 | 75.8 MPa |
| compressive strength | ASTM D695 | 155 MPa | |
| Flexural modulus | ASTM D790 | 9650 MPa | |
| tensile strength | 屈服 | ASTM D638 | 35.2 MPa |
| physical property | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30to0.40 % |
| ASTM D1895 | 2.0 | ||
| Water absorption rate | 24hr | ASTM D570 | 0.70 % |
| density | ASTM D792 | 1.39 g/cm³ |
| Thermal performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2002-4P |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 229 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.8E-05 cm/cm/°C |
Contact Us
Get App
Top