Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP FB51R HANWHA TOTAL KOREA
--
parts,Small electronic and electrical accessories
Flame retardant,processability,Flame retardancy (V-0),one,32"),Impact resistance
TDS
TDS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51R |
|---|---|---|---|
| Heat Deflection Temperature | 4.6kg/cm | ASTM D-648 | 100 ℃ |
| mechanical properties | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51R |
|---|---|---|---|
| bending strength | ASTM D-747 | 33 Mpa | |
| Elongation at break | 50mm/min | ASTM D-638 | 150 % |
| flexural modulus | ASTM D-790 | 1196 Mpa | |
| IZOD impact strength | 23℃ | ASTM D-256 | 11 kg·cm/cm |
| Rockwell hardness | 23℃ | ASTM D-785 | 85 R scale |
| Yield tensile strength | 50mm/min | ASTM D-638 | 27 Mpa |
| Physical properties | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51R |
|---|---|---|---|
| melt mass-flow rate | 230℃ 2.16kg | ASTM D-1238 | 10 g/10min |
| shrinkage rate | 2mm(t) | SGC method | 1.2-1.6 % |
| injection | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51R |
|---|---|---|---|
| Back pressure | 0.490 到 1.96 Mpa | ||
| Injection Pressure | 39.2 到 78.5 Mpa | ||
| mold temperature | 40 到 70 °C | ||
| Spray nozzle temperature | 190 到 210 °C | ||
| Temperature at the front of the material cylinder | 180 到 200 °C | ||
| Temperature at the rear of the barrel | 170 到 180 °C | ||
| Temperature in the middle of the barrel | 180 到 200 °C |
Contact Us
Get App
Top