Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA610 Grilamid® 2S 25 W 20 X nat EMS-GRIVORY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | 无断裂 | |
| Charpy Notched Impact Strength | -30°C | kJ/m² | 15 15 |
| 23°C | 无断裂 | ||
| Impact strength of simply supported beam without notch | -30°C | 无断裂 |
| hardness | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| ball-indentation hardness | MPa | 50.0 35.0 |
| Electrical performance | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| dielectric strength | kV/mm | 38 37 | |
| Compared to the Leakage Tracking Index (CTI) | V | -- | |
| Surface Resistivity | ohms | -- 1E+11 | |
| Volume resistivity | ohms·cm | 1E+11 1E+12 |
| Mechanical properties | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| Tensile modulus | MPa | 750 450 | |
| Tensile strain | 断裂 | % | >50 >50 |
| tensile strength | 断裂 | MPa | 40.0 40.0 |
| flammability | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| Flammability level | 0.8mm | HB -- |
| physical property | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| Shrinkage rate | MD | % | 2.3 -- |
| density | g/cm³ | 1.03 -- | |
| Water absorption rate | 饱和,23°C | % | 3.0 -- |
| Shrinkage rate | TD | % | 1.7 -- |
| Water absorption rate | 平衡,23°C,50%RH | % | 0.50 -- |
| Thermal performance | Test Condition | Test Method | EMS-GRIVORY/Grilamid® 2S 25 W 20 X nat |
|---|---|---|---|
| Continuous use temperature | --2 | °C | 110to130 -- |
| --3 | °C | 160 -- | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | °C | 115 -- |
| melting temperature | °C | 215 -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 2E-04 -- |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 50.0 -- |
| Linear coefficient of thermal expansion | TD | cm/cm/°C | 1.5E-04 -- |
Contact Us
Get App
Top