PC CFR9111-NA8E061T PC vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC SABIC INNOVATIVE NANSHA CFR9111-NA8E061T

Injection grade

US$ 5,060 / MT

FOB Guangzhou port, China

injection	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
Back pressure			0.300 to 0.700 Mpa
Temperature at the front of the material cylinder			280 to 305 °C
Screw speed			40 to 70 rpm
Mold temperature			70 to 95 °C
Processing (melt) temperature			280 to 305 °C
Suggested injection volume			40 to 60 %
Suggested maximum moisture content			0.020 %
Spray nozzle temperature			275 to 300 °C
Exhaust hole depth			0.025 to 0.076 mm
drying temperature			120 °C
Temperature in the middle of the barrel			270 to 295 °C
drying time			3.0 to 4.0 hr
Temperature at the rear of the barrel			260 to 280 °C
mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
bending strength	--5,6	ISO 178	96.0 Mpa
Bending modulus	50.0 mm Span4	ASTM D790	2400 Mpa
bending strength	Yield, 50.0 mm Span4	ASTM D790	103 Mpa
elongation	Break	ISO 527-2/50	73 %
		Yield3	ASTM D638	6.0 %
		Yield	ISO 527-2/50	6.0 %
		Break3	ASTM D638	80 %
tensile strength	Break	ISO 527-2/50	57.0 Mpa
		Yield3	ASTM D638	67.0 Mpa
		Yield	ISO 527-2/50	63.0 Mpa
Tensile modulus	--2	ASTM D638	2400 Mpa
Tensile modulus		--	ISO 527-2/1	2300 Mpa
Bending modulus	--5	ISO 178	2400 Mpa
tensile strength	Break3	ASTM D638	54.0 Mpa
flammability	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
UL flame retardant rating	1.2 mm	UL 94	V-1
UL flame retardant rating		0.40 mm	UL 94	V-2
Hot filament ignition temperature	1.5 mm	IEC 60695-2-13	850 °C
UL flame retardant rating	1.5 mm	UL 94	V-0
Burning wire flammability index	1.5 mm	IEC 60695-2-12	960 °C
Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
Shrinkage rate	Across FlowFlow : 3.20 mm	Internal Method	0.60 - 0.80 %
Water absorption rate	Saturation, 23°C	ISO 62	0.13 %
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	17.0 cm3/10min
Shrinkage rate	Flow : 3.20 mm	Internal Method	0.55 - 0.75 %
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.11 %
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	18 g/10 min
thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	7.0E-5 cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Ae	121 °C
Hot deformation temperature		0.45 MPa, Unannealed, 3.20 mm	ASTM D648	130 °C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	6.8E-5 cm/cm/°C
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Be	131 °C
Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.7E-5 cm/cm/°C
Vicat softening temperature	--	ISO 306/B50	139 °C
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	120 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	8.0E-5 cm/cm/°C
RTI		UL 746	130 °C
Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	120 °C
Vicat softening temperature	--	ISO 306/B120	140 °C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Vicat softening temperature	--	ASTM D152510	136 °C
optical performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
transmissivity	1000 μm	Internal Method	> 90.0 %
		3000 μm	Internal Method	> 88.0 %
		2000 μm	Internal Method	> 89.0 %
impact performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
Suspended wall beam without notch impact strength	23°C	ASTM D4812	无断裂
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	10 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Dart impact	23°C, Total Energy	ASTM D3763	80.0 J
Charpy Notched Impact Strength	23°C	ISO 179/1eA	59 kJ/m²
Suspended wall beam without notch impact strength	-30°C	ASTM D4812	无断裂
Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/CFR9111-NA8E061T
Dielectric constant	1.10 GHz	ASTM ES7-83	2.79
Dissipation factor	1.10 GHz	ASTM ES7-83	5.6E-3

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index