Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 TSG-30 EMS-CHEMIE SWITZERLAND
Grilon®
Automotive Applications
Thermal stability,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSG-30 |
|---|---|---|---|
| density | dry | ISO 1183 | 1.34 g/cm |
| Water absorption rate | 23℃/50%rh | ISO 62 | 2.0 % |
| 23℃ | ISO 62 | 6.5 % |
| Mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSG-30 |
|---|---|---|---|
| elongation at break | 50mm/min(dry,cond) | ISO 527 | 3(6) % |
| Impact strength of cantilever beam gap | Charpy,23℃(dry,cond) | ISO 179/1eU | 无断裂(无断裂) KJ/m |
| ball-indentation hardness | dry,cond | ISO 2039-1 | 210(110) Mpa |
| Impact strength of cantilever beam gap | Charpy,-30℃(dry,cond) | ISO 179/1eU | 无断裂(无断裂) KJ/m |
| Charpy,-30℃(dry,cond) | ISO 179/1eA | 10(10) KJ/m | |
| tensile strength | 50mm/min(dry,cond)，断裂 | ISO 527 | 175(120) Mpa |
| Tensile modulus | 1mm/min,(dry,cond) | ISO 527 | 9700(6000) Mpa |
| Impact strength of cantilever beam gap | Charpy,23℃(dry,cond) | ISO 179/1eA | 13(20) KJ/m |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSG-30 |
|---|---|---|---|
| dielectric strength | dry,cond | IEC 60243-1 | 25(24) KV/mm |
| Surface Resistivity | cond | IEC 60093 | 10 Ω |
| Volume resistivity | dry,cond | IEC 60093 | 10 Ω.cm |
| arc resistance | cond | IEC 60112 | 600 |
| physical property | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSG-30 |
|---|---|---|---|
| Shrinkage rate | trans,横向,dry | ISO 294 | 0.65 % |
| long,纵向 | ISO 294 | 0.10 % |
| Thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TSG-30 |
|---|---|---|---|
| maximum service temperature | short term,dry | ISO 2578 | 220 °C |
| Heat distortion temperature | 8.00MPa,dry，HDT | ISO 75 | 135 °C |
| maximum service temperature | long term,dry | ISO 2578 | 100-130 °C |
| Linear coefficient of thermal expansion | 23-55℃,dry | ISO 11359 | 0.2 |
| 23-55℃,dry(横向) | ISO 11359 | 1.1 | |
| UL flame retardant rating | 0.8mm | ISO 1210 | HB |
| Heat distortion temperature | 1.80MPa,dry，HDT | ISO 75 | 220 °C |
| melting temperature | DSC,dry | ISO 11357 | 260 °C |
Contact Us
Get App
Top