plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LCP 7244 BK010 CELANESE USA
ZENITE®
Electrical applications
High heat resistance,Flame retardant,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodCELANESE USA/7244 BK010
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/A295 °C
Linear coefficient of thermal expansionAcross FlowISO 11359-24.1E-5 cm/cm/°C
FlowISO 11359-26.0E-6 cm/cm/°C
mechanical propertiesTest ConditionTest MethodCELANESE USA/7244 BK010
Bending modulus23°CISO 17811300 Mpa
bending strength23°CISO 178180 Mpa
Tensile modulusISO 527-2/1A14000 Mpa
Tensile strainBreakISO 527-2/1A/51.4 %
tensile strengthBreakISO 527-2/1A/5115 Mpa
Electrical performanceTest ConditionTest MethodCELANESE USA/7244 BK010
Compared to the anti leakage trace indexIEC 60112PLC 3
Physical propertiesTest ConditionTest MethodCELANESE USA/7244 BK010
Shrinkage rate横向FlowISO 294-40.50 %
FlowISO 294-40.10 %
flammabilityTest ConditionTest MethodCELANESE USA/7244 BK010
UL flame retardant rating0.35 mmUL 94V-0
injectionTest ConditionTest MethodCELANESE USA/7244 BK010
Back pressure< 3.00 Mpa
drying temperature150 °C
drying time3.0 hr
Hopper temperature20 to 30 °C
Mold temperature80 to 120 °C
Processing (melt) temperature360 to 370 °C
Spray nozzle temperature360 to 370 °C
Suggested maximum moisture content0.010 %
Temperature at the front of the material cylinder360 to 370 °C
Temperature at the rear of the barrel355 to 365 °C
Temperature in the middle of the barrel360 to 370 °C