Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM SF-10NC JAPAN POLYPLASTIC
DURACON®
Fitness equipment、Automotive sector
Toughening、High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| Rockwell hardness | M级 | ISO 2039-2 | 60 |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| ColorNumber | CF2001 |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| Wear factor | 0.060MPa,0.15m/sec7 | JISK7218 | 300 10^-8mm³/N·m |
| 0.060MPa,0.15m/sec6 | JISK7218 | 100 10^-8mm³/N·m | |
| Tensile modulus | ISO 527-2 | 1900 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 60 % | |
| coefficient of friction | 与钢-动态3 | JISK7218 | 0.50 |
| Wear factor | 0.49MPa,0.30m/sec4 | JISK7218 | <1.0 10^-8mm³/N·m |
| 0.49MPa,0.30m/sec5 | JISK7218 | 50 10^-8mm³/N·m | |
| bending strength | ISO 178 | 61.0 Mpa | |
| Flexural modulus | ISO 178 | 1800 Mpa | |
| coefficient of friction | Dynamic2 | JISK7218 | 0.40 |
| tensile strength | ISO 527-2 | 45.0 Mpa |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.60 % |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/SF-10NC |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD：23to55°C | 内部方法 | 1.3E-04 cm/cm/°C |
| MD：23到55°C | 内部方法 | 1.3E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 82.0 °C |
Contact Us
Get App
Top