Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK A2000 BASF GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | BASF GERMANY/A2000 |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | >10 Ω | |
| dielectric constant | ASTM D150/IEC 60250 | 3.2/3.6 |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/A2000 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 10 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 110 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 75 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 5 % | |
| Tensile modulus | ASTM D638/ISO 527 | 4400 kg/cm²(MPa)[Lb/in²] | |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 5 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 20 % | |
| Rockwell hardness | ASTM D785 | M105 | |
| tensile strength | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | BASF GERMANY/A2000 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 5 % | |
| density | ASTM D792/ISO 1183 | 1.31 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 3 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.06 % |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/A2000 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | 0 | |
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 315 ℃（℉） |
| vicat | ASTM D1525/ISO R306 | 1 ℃（℉） | |
| melting temperature | 340 ℃（℉） | ||
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.8 mm/mm.℃ |
Contact Us
Get App
Top