Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP E471iVF2201 CELANESE USA
--
Laptop case,Electronic and Electrical Applications,SMT application,Communication equipment,Card slot
Low warpage
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Rockwell hardness | M-Scale | ISO 2039-2 | 55 |
thermal performance | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 220 °C |
1.8MPa,Unannealed | ISO 75-2/A | 265 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.8E-05 cm/cm/°C |
MD | ISO 11359-2 | 6E-06 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 335 °C | |
Vicat softening temperature | ISO 306/B50 | 200 °C |
mechanical properties | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 13500 Mpa |
bending strength | 23°C | ISO 178 | 180 Mpa |
Compressive modulus | ISO 604 | 11000 Mpa | |
CompressiveStress | 1%Strain | ISO 604 | 82.0 Mpa |
Fracture bending strain | ISO 178 | 2.5 % | |
Tensile modulus | ISO 527-2/1A/1 | 13800 Mpa | |
Tensile strain | Break | ISO 527-2/1A/5 | 2.5 % |
tensile strength | Break | ISO 527-2/1A/5 | 130 Mpa |
Electrical performance | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Dielectric strength | IEC 60243-1 | 53 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.031 |
Relative permittivity | 1MHz | IEC 60250 | 3.80 |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.10 % |
TD | ISO 294-4 | 0.50 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 2E-03 % |
Saturation,23°C | ISO 62 | 0.015 % |
impact performance | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 55 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 60 kJ/m² |
flammability | Test Condition | Test Method | CELANESE USA/E471iVF2201 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |