plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM JW-01 JAPAN POLYPLASTIC
DURACON®
Power tool accessories,Automotive components,Home appliance components
Thermal stability,High impact resistance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
Rockwell hardnessM-ScaleISO 2039-280
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
ColourNumberCF2001
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A98.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.2E-04 cm/cm/°C
TD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
Bending modulusISO 1782400 Mpa
bending strengthISO 17879.0 Mpa
Friction coefficientDynamic2JISK72180.21
Steel - Dynamic3JISK72180.17
Nominal tensile fracture strainISO 527-235 %
Tensile modulusISO 527-22600 Mpa
tensile strengthISO 527-254.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721821 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK721880 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK7218220 10^-8mm³/N·m
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
melt mass-flow rate190°C/2.16kgISO 113346 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 113339.0 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.7 %
MD:2.00mmISO 294-41.9 %
Water absorption rate23°C,24hrISO 620.60 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/JW-01
UL flame retardant ratingUL 94HB