Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 E47-S3 EVONIK GERMANY
VESTAMID®
sporting goods、Engine parts、Conveyor accessories
Low temperature impact re、High elasticity、Easy to process
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodEVONIK GERMANY/E47-S3
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
hardnessTest ConditionTest MethodEVONIK GERMANY/E47-S3
Shore hardness邵氏DISO 86847
Mechanical propertiesTest ConditionTest MethodEVONIK GERMANY/E47-S3
Tensile modulusISO 527-2120 Mpa
tensile strength --ISO 527-223.0 Mpa
Tensile strain断裂ISO 527-2>200 %
Tensile creep modulus1000hrISO 899-190.0 Mpa
tensile strength 50%应变ISO 527-212.0 Mpa
Electrical performanceTest ConditionTest MethodEVONIK GERMANY/E47-S3
dielectric strengthIEC 60243-137 KV/mm
Volume resistivityIEC 600931E+11 ohms·cm
relative permittivity23°C,1MHzIEC 602504.70
23°C,100HzIEC 602508.50
Surface ResistivityIEC 600931E+13 ohms
Compared to the Leakage Tracking Index (CTI)解决方案AIEC 60112PLC 0
Dissipation Factor23°C,100HzIEC 602500.12
23°C,1MHzIEC 602500.13
flammabilityTest ConditionTest MethodEVONIK GERMANY/E47-S3
UL flame retardant rating1.6mmUL 94HB
physical property Test ConditionTest MethodEVONIK GERMANY/E47-S3
Shrinkage rateTDISO 294-40.90-1.5 %
MDISO 294-40.60-1.0 %
viscosity numberISO 307190 cm³/g
Water absorption rate饱和,23°CISO 621.0 %
Thermal performanceTest ConditionTest MethodEVONIK GERMANY/E47-S3
Linear coefficient of thermal expansionMD：23到55°CISO 11359-22.3E-04 cm/cm/°C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B65.0 °C
Linear coefficient of thermal expansionTD：23to55°CISO 11359-22.1E-04 cm/cm/°C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A45.0 °C
vicat--ISO 306/B70.0 °C
--ISO 306/A140 °C

Contact Us

Get App

Top