Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU GF-120 SOLVAY USA
UDEL®
Industrial components,Electrical applications,Vehicle electronics
heat-resisting
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 180 °C |
mechanical properties | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
Bending modulus | ASTM D790 | 5520 Mpa | |
bending strength | ASTM D790 | 148 Mpa | |
elongation | Break | ASTM D638 | 3.0 % |
Tensile modulus | ASTM D638 | 6000 Mpa | |
tensile strength | ASTM D638 | 96.5 Mpa |
Electrical performance | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
Dielectric constant | 1MHz | ASTM D150 | 3.28 |
60Hz | ASTM D150 | 3.31 | |
Dielectric strength | ASTM D149 | 19 KV/mm | |
Dissipation factor | 1MHz | ASTM D150 | 6E-03 |
60Hz | ASTM D150 | 8E-03 | |
Volume resistivity | ASTM D257 | 2E+16 ohms·cm |
Physical properties | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
density | ASTM D792 | 1.40 g/cm³ | |
melt mass-flow rate | 343°C/2.16kg | ASTM D1238 | 6.5 g/10min |
Shrinkage rate | MD | ASTM D955 | 0.30 % |
impact performance | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 53 J/m | |
ASTM D1822 | 109 kJ/m² |
flammability | Test Condition | Test Method | SOLVAY USA/GF-120 |
---|---|---|---|
UL flame retardant rating | 3.2mm | UL 94 | HB |