Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 CM1016G-15 TORAY JAPAN
Amilan®
--
Standard viscosity、High stiffness、thermal stability、Climate resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | TORAY JAPAN/CM1016G-15 |
|---|---|---|---|
| Water absorption rate | 23℃，24小时 | ASTM D-570 | 3.5%水｜- % |
| Mechanical properties | Test Condition | Test Method | TORAY JAPAN/CM1016G-15 |
|---|---|---|---|
| Flexural modulus | -40℃ | ASTM D-790 | 3.5%水｜- kg/cm2 |
| 23℃ | ASTM D-790 | 无水｜31000 kg/cm2 | |
| tensile strength | 23℃，屈服 | ASTM D-638 | 3.5%水｜470 kg/cm2 |
| bending strength | 23℃ | ASTM D-790 | 3.5%水｜530 kg/cm2 |
| Flexural modulus | 80℃ | ASTM D-790 | 3.5%水｜- kg/cm2 |
| Rockwell hardness | 23℃ | ASTM D-785 | 无水｜119 R-标度 |
| Impact strength of cantilever beam gap | V-缺口1/2，23℃ | 3.5%水｜40 kg.cm/cm | |
| compressive strength | 23℃ | ASTM D-695 | 3.5%水｜- kg/cm2 |
| Impact strength of cantilever beam gap | 23℃，无缺口1/8 | 3.5%水｜- kg.cm/cm | |
| shearing strength | 23℃ | ASTM D-732 | 3.5%水｜700 kg/cm2 |
| elongation at break | 23℃ | ASTM D-638 | 3.5%水｜<200 % |
| Impact strength of cantilever beam gap | 无缺口1/8，23℃ | 3.5%水｜- kg.cm/cm | |
| tensile strength | 23℃，断裂 | ASTM D-638 | 3.5%水｜- kg/cm2 |
| physical property | Test Condition | Test Method | TORAY JAPAN/CM1016G-15 |
|---|---|---|---|
| Taber abraser | 1000g,CS-17 | ASTM D-1044 | 3.5%水｜- mg/1000次 |
| Thermal performance | Test Condition | Test Method | TORAY JAPAN/CM1016G-15 |
|---|---|---|---|
| thermal conductivity | 3.5%水｜- Kcal/m.hr.°C | ||
| specific heat | 3.5%水｜- Cal/g.°C | ||
| melting temperature | 差示扫描测热计DSC法 | 225 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 无水｜8 10-5cm/cm.℃ | |
| ASTM D-696 | 3.5%水｜- | ||
| UL-94 flame retardant grade | UL 94 | 3.5%水｜- | |
| Heat distortion temperature | 4.6kg/cm2，HDT | ASTM D-648 | 3.5%水｜- °C |
Contact Us
Get App
Top