Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA Plaslube® HTN 01420 BK Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 43 J/m |
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 116 |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| coefficient of friction | 与钢-静态6 | ASTM D1894 | 0.24 |
| elongation | 断裂 | ASTM D638 | 9.0 % |
| tensile strength | 断裂 | ASTM D638 | 91.0 MPa |
| Flexural modulus | ASTM D790 | 3100 MPa | |
| coefficient of friction | 与钢-动态 | ASTM D1894 | 0.31 |
| bending strength | ASTM D790 | 124 MPa | |
| Wear factor | ASTM D3702 | 150 10^-8mm³/N·m |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.27 % |
| density | ASTM D792 | 1.21 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.80 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® HTN 01420 BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 148 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 4.7E-05 cm/cm/°C |
Contact Us
Get App
Top