Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS HD M203FC WT018646 INEOS GERMANY
Novodur®
medical care、Shell、Medical/nursing supplies
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| Melting temperature | ISO294 | 240 °C | |
| burning rate | ISO3795 | 60 mm/min | |
| injection speed | ISO294 | 240 mm/sec |
| Impact resistance | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO179 | 110 kJ/m² |
| -30°C | ISO179 | 90 kJ/m² |
| hardness | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| ISO2039-1 | 110 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+15 ohms | |
| Electrical strength | 1.50mm | IEC60243-1 | 35 KV/mm |
| Dissipation Factor | IEC60250 | 0.09 | |
| 1MHz | IEC60250 | 9E-03 | |
| 相对漏电起痕指数 | IEC60112 | 600 V | |
| 1MHz | IEC60250 | 2.90 | |
| dielectric constant | IEC60250 | 2.9 1MHz | |
| 100Hz | IEC60250 | 3.00 | |
| CTI | IEC60112 | 600 V | |
| Dissipation Factor | 100Hz | IEC60250 | 5E-03 |
| IEC60093 | 1E+13 Ω.cm | ||
| Volume resistivity | IEC60093 | >1.0E+15 ohms·cm | |
| dielectric constant | IEC60250 | 3 100HZ | |
| Surface Resistivity | IEC60093 | 1E+15 Ω.cm | |
| Dielectric Strength | 1.00mm | IEC60243-1 | 35 KV/mm |
| Mechanical properties | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 7 kJ/m² |
| Flexural modulus | 23°C | ISO178 | 2400 Mpa |
| elongation at break | 23°C | ISO527-2 | >=15 % |
| Tensile strain | 屈服,23°C | ISO527-2 | 2.6 % |
| Impact strength of cantilever beam gap | -30°C | ISO180/1A | 7 kJ/m² |
| Bending stress | ISO178 | 70.0 Mpa | |
| elongation at break | 屈服，23°C | ISO527-2 | 2.6 % |
| Tensile modulus | ISO527-2 | 2400 Mpa | |
| Tensile stress | 屈服,23°C | ISO527-2 | 46.0 Mpa |
| Impact strength of simply supported beam without notch | 23°C | ISO179/1eU | 110 kJ/m² |
| -30°C | ISO179/1eU | 90 kJ/m² | |
| Tensile modulus | 23°C | ISO527-2 | 2400 Mpa |
| ISO2039-1 | 105 Mpa | ||
| tensile strength | 屈服，23°C | ISO527-2 | 46 Mpa |
| Impact strength of cantilever beam gap | 23°C | ISO180/1A | 15 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179/1eA | 15 kJ/m² |
| bending strength | 23°C | ISO178 | 70 Mpa |
| Flexural modulus | ISO178 | 2400 Mpa | |
| Tensile strain | 断裂,23°C | ISO527-2 | >15 % |
| Flame retardant performance | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| GWIT | 2.00mm | IEC60695-2-12 | 700 °C |
| physical property | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| 220℃/10.0Kg | ISO1133 | 31 g/10min | |
| 线性收缩率 | ISO294-4 | 0.4-0.7 % | |
| Melt volume flow rate | 220°C/10.0kg | ISO1133 | 31.0 cm3/10min |
| Shrinkage rate | ISO294-4 | 0.40to0.70 % |
| Thermal performance | Test Condition | Test Method | INEOS GERMANY/HD M203FC WT018646 |
|---|---|---|---|
| 0.45MPa未退火 | ISO75-2/Bf | 98 °C | |
| 1.80MPa退火 | ISO75-2/Af | 94 °C | |
| vicat | ISO306/B50 | 99.0 °C | |
| 5.10kg | ISO306/A50 | 99 °C | |
| 1.8MPa,退火 | ISO75-2/A | 94.0 °C | |
| MD | ISO11359-2 | 9E-05 cm/cm/°C | |
| 0.45MPa,Annealed | ISO75-2/B | 98.0 °C |
Contact Us
Get App
Top