Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Polyester, TS Glasrod SG-200 USA Glastic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | USA Glastic/Glasrod SG-200 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7E-06 cm/cm/°C |
| thermal conductivity | ASTMC177 | 0.29 W/m/K |
| mechanical properties | Test Condition | Test Method | USA Glastic/Glasrod SG-200 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 20700 MPa | |
| bending strength | Yield | ASTM D790 | 552 MPa |
| shear strength | ASTM D732 | 20.7 MPa | |
| Tensile modulus | ASTM D638 | 1.38E+06 MPa | |
| tensile strength | Yield | ASTM D638 | 483 MPa |
| Electrical performance | Test Condition | Test Method | USA Glastic/Glasrod SG-200 |
|---|---|---|---|
| Arc resistance | ASTM D495 | 150 sec | |
| Dielectric constant | 60Hz | ASTM D150 | 5.00 |
| Dielectric strength | 25.4mm,inOil | ASTM D149 | 2.8 kV/mm |
| Physical properties | Test Condition | Test Method | USA Glastic/Glasrod SG-200 |
|---|---|---|---|
| density | ASTM D792 | 1.85 g/cm³ | |
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| impact performance | Test Condition | Test Method | USA Glastic/Glasrod SG-200 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 2100 J/m |