Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT SK601 NC010 DUPONT USA
Cristin®
Electronic and electrical components,Automotive Applications
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | DUPONT USA/SK601 NC010 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 215 °C |
| 1.80MPaUnannealed | ISO 75-2/Af | 175 °C | |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.2E-04 cm/cm/°C |
| MD | ISO 11359-2 | 6E-05 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 225 °C | |
| Vicat softening temperature | ISO 306/B50 | 205 °C |
| mechanical properties | Test Condition | Test Method | DUPONT USA/SK601 NC010 |
|---|---|---|---|
| bending strength | 23°C | ISO 178 | 140 Mpa |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 6.00 kJ/m² |
| -30°C | ISO 179/1eA | 6.00 kJ/m² | |
| Elongation at Break | 23°C | ISO 527-2 | 4.70 % |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 4.50 kJ/m² |
| -30°C | ISO 180/1A | 5.00 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 40 kJ/m² |
| -30°C | ISO 179/1eU | 40 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 27 kJ/m² |
| -30°C | ISO 180/1U | 26 kJ/m² | |
| Tensile creep modulus | 1Hr | ISO 899-1 | 4000 Mpa |
| 1000Hr | ISO 899-1 | 2500 Mpa | |
| Tensile modulus | 23°C | ISO 527-2 | 4500 Mpa |
| tensile strength | 23°C | ISO 527-2 | 90 Mpa |
| Electrical performance | Test Condition | Test Method | DUPONT USA/SK601 NC010 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
| Dielectric constant | 23°C | IEC 60250 | 3.90 100HZ |
| 23°C | IEC 60250 | 3.50 1MHz | |
| Dielectric strength | IEC 60243-1 | 35 KV/mm | |
| Dissipation factor | 23°C | IEC 60250 | 0.020 1MHz |
| 23°C | IEC 60250 | 2E-03 100HZ | |
| Volume resistivity | IEC 60093 | 1E+16 Ω.cm |
| Physical properties | Test Condition | Test Method | DUPONT USA/SK601 NC010 |
|---|---|---|---|
| Shrinkage rate | TD2.0mm | ISO 294-4 | 1.20 % |
| MD2.0mm | ISO 294-4 | 0.70 % | |
| Water absorption rate | 23°C,50RH | ISO 62 | 0.20 % |
| 23°C,24hr | ISO 62 | 0.40 % |
| flammability | Test Condition | Test Method | DUPONT USA/SK601 NC010 |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 20 % | |
| UL flame retardant rating | Allcolor | UL -94 | HB 6.00mm |
| Allcolor | UL -94 | HB 1.50mm | |
| Allcolor | UL -94 | HB 3.00mm | |
| Allcolor | UL -94 | 0.75mm |