Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Hyundai EP PA66 LD460 HYUNDAI KOREA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 74 J/m |
| hardness | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 121 |
| Electrical performance | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 1 |
| Volume resistivity | ASTM D257 | 1.0E+13到1.0E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 4.0 kV/mm | |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 0 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 4 |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 2 |
| High Voltage Arc Traceability Rate (HVTR) | PLC | UL 746 |
| Mechanical properties | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 5300 MPa | |
| tensile strength | 屈服 | ASTM D638 | 93.2 MPa |
| bending strength | ASTM D790 | 157 MPa |
| flammability | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| density | ASTM D1505 | 1.40 g/cm³ | |
| ash content | 30 % |
| Thermal performance | Test Condition | Test Method | HYUNDAI KOREA/Hyundai EP PA66 LD460 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 245 °C |
| melting temperature | 265 °C |
Contact Us
Get App
Top