Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT BT-2230 BK DIC MALAYSIA
--
currency,currency
Glass fiber reinforced,currency,Filler: Glass fiber reinf,30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 118 |
thermal performance | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 200 °C |
Linear coefficient of thermal expansion | MD:-30to100°C | ASTM D696 | 2.5E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Bending modulus | ASTM D790 | 9500 Mpa | |
bending strength | ASTM D790 | 205 Mpa | |
compressive strength | ASTM D695 | 130 Mpa | |
elongation | Break | ASTM D638 | 2.5 % |
Tensile modulus | ASTM D638 | 10500 Mpa | |
tensile strength | ASTM D638 | 130 Mpa |
Electrical performance | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Arc resistance | ASTM D495 | 130 sec | |
Compared to the anti leakage trace index | CTI | UL 746 | V |
Dielectric constant | 1MHz | ASTM D150 | 3.60 |
Dielectric strength | 1.60mm | ASTM D149 | 26 KV/mm |
Dissipation factor | 1MHz | ASTM D150 | 0.020 |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.30 % |
TD | ASTM D955 | 1.3 % | |
Water absorption rate | 23°C,24hr | ASTM D570 | 0.060 % |
impact performance | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
Suspended wall beam without notch impact strength | ASTM D256 | 500 J/m |
flammability | Test Condition | Test Method | DIC MALAYSIA/BT-2230 BK |
---|---|---|---|
UL flame retardant rating | 0.30mm | UL 94 | V-0 |