Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PET AV2 360S DSM HOLAND
Arnite®
Electronic and electrical、Electrical applications、Industrial components
Antichemical、Not resistant to hot wate、Dimensional stability
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | DSM HOLAND/AV2 360S |
|---|---|---|---|
| UL flame retardant rating | 1.60 mm | IEC 60695-11-10, -20 | HB |
| 0.780 mm | IEC 60695-11-10, -20 | HB |
| Basic performance | Test Condition | Test Method | DSM HOLAND/AV2 360S |
|---|---|---|---|
| Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 0.25 % |
| Saturation, 23°C | ISO 62 | 0.50 % | |
| density | ISO 1183 | 1.52 g/cm³ |
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/AV2 360S |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 60 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 250 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D412/ISO 527 | 11500 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D412/ISO 527 | 2 % | |
| Flexural modulus | ASTM D790/ISO 178 | 11500 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | Break | ISO 527-2 | 150 MPa |
| Tensile strain | Break | ISO 527-2 | 2.5 % |
| Tensile modulus | ISO 527-2 | 5500 MPa | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eA | 9.0 kJ/m² |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 25 kg·cm/cm(J/M)ft·lb/in | |
| Rockwell hardness | ASTM D785 | 114 | |
| tensile strength | ASTM D638/ISO 527 | 165 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/AV2 360S |
|---|---|---|---|
| Volume resistivity | IEC 60093 | ohm·cm | |
| IEC 60093 | ohm·m | ||
| Surface Resistivity | IEC 60093 | ohms |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/AV2 360S |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 255 °C | |
| Heat distortion temperature | 1.8 MPa,未退火，HDT | ISO 75-2/A | 225 °C |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 0.000030 cm/cm/°C |
| Transverse | ISO 11359-2 | 0.000070 cm/cm/°C |
Contact Us
Get App
Top