Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PS PS 3D Systems
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 14 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | <11 J/m |
| Supplementary Information | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| UpwardSurface | AsProcessed | 13.0 µm | |
| Auto-ignition | 410 °C | ||
| UpwardSurface | AfterPolishing | 3.0 µm |
| Mechanical properties | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| tensile strength | 极限 | ASTM D638 | 2.84 MPa |
| Tensile modulus | ASTM D638 | 1600 MPa |
| flammability | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| flash point | --4，克利夫兰开口杯法 | >200 °C | |
| --5，克利夫兰开口杯法 | 350 °C |
| physical property | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| Water absorption rate | 平衡,20°C,65%RH | ASTM D570 | 0.060 % |
| density | --3 | ASTM D4164 | 0.460 g/cm³ |
| ash content | ASTM D482 | 0.020 % | |
| density | --2 | ASTM D792 | 0.860 g/cm³ |
| Thermal performance | Test Condition | Test Method | 3D Systems/ PS |
|---|---|---|---|
| melting temperature | >63.0 °C | ||
| Glass Transition Temperature | ASTM D3418 | 89.0 °C |
Contact Us
Get App
Top