Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO N225X-780 SABIC INNOVATIVE SHANGHAI
NORYL™
medical care
Processability、Chlorine resistance、Bromine free、Flame retardant、Non brominated、Improved processability a、Non chlorinated、Flame retardant、Non brominated、Improved processability a、Non chlorinated、Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/N225X-780 |
|---|---|---|---|
| Flexural modulus | 0.25 | ASTM D-790 | 361500 psi |
| Izod impact value, reverse gap, 73F | ASTM D 256 | 16.6 ft-lb/in | |
| Izod Impact Value, Reverse Gap, -22F | ASTM D-256 | 12.0 ft-lb/in | |
| elongation at break | 类型I, 0.125 | ASTM D-638 | 17.0 % |
| Instrument control anti impact energy @ peak, 73F | ASTM D-3763 | 29.0 ft-lbs | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 3.5 ft-lb/in |
| tensile strength | 断裂 | ASTM D 638 | 7200 psi |
| 屈服, 类型 I, 0.125 | ASTM D-638 | 9700 psi | |
| Izod Impact Value, Gap, -22F | ASTM D-256 | 1.8 ft-lb/in | |
| bending strength | 屈服点 | ASTM D-790 | 14400 psi |
| Tensile elongation, yield, type I 0.125 | ASTM D-638 | 8.0 % | |
| Instrument control anti impact energy @ peak, -22F | ASTM D-3763 | 8.6 ft-lbs |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/N225X-780 |
|---|---|---|---|
| Loss factor | 50 Hz | ASTM D-150 | 0.0100 |
| dielectric constant | ASTM D-150 | 2.55 | |
| Surface Resistivity | ASTM D-257 | >1 E14 ohm/sq | |
| Volume resistivity | ASTM D-257 | 2E+16 ohm-cm | |
| Loss factor | 1 MHz | ASTM D-150 | 0.0070 |
| dielectric strength | 油中, 125 mils | ASTM D-149 | 414 v/mil |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/N225X-780 |
|---|---|---|---|
| Shrinkage rate | 流动方向, 0.125 | ASTM D-955 | 5-7 in/in E-3 |
| density | ASTM D-792 | 1.11 | |
| Mold shrinkage, xflow, 0.125 | ASTM D-955 | 5-7 in/in E-3 |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/N225X-780 |
|---|---|---|---|
| Heat distortion temperature | 264 psi, 0.250，HDT | ASTM D-648 | 211 deg F |
| UL file number | E121562 | ||
| UL flame retardant rating | 测试厚度，V-0 | UL 94 | 0.060 inch |
| vicat | ASTM D-1525 | 264 deg F | |
| Heat distortion temperature | 66 psi, 0.250", 未退火，HDT | ASTM D-648 | 229 deg F |
| Relative Heat Index (RTI) | 机械冲击 | UL 746B | 80 deg C |
| 电气 | UL 746B | 95 deg C | |
| 非机械冲击 | UL 746B | 95 deg C | |
| UL flame retardant rating | 测试厚度，5VA | UL 94 | 0.120 inch |
Contact Us
Get App
Top