Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B3 GF 15 1 L BK AKRO-PLASTIC GERMANY
AKROMID®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
| -30°C | ISO 179/1eU | 60 kJ/m² |
| Supplementary Information | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| ReinforcementContent | ISO 1172 | 15 % |
| Mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 5200 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 105 Mpa |
| Tensile strain | 断裂 | ISO 527-2/5 | 3.3 % |
| flammability | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| burning rate | 1.00mm | FMVSS302 | <100 mm/min |
| Burning wire flammability index | 0.8mm | IEC 60695-2-12 | 700 °C |
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| Hot filament ignition temperature | 0.8mm | IEC 60695-2-13 | 725 °C |
| physical property | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.90 % |
| MD | ISO 294-4 | 0.50 % | |
| moisture absorption | 70°C，62%RH | ISO 1110 | 1.7 % |
| spiral flow length | 内部方法 | 100 CM | |
| Melt volume flow rate | 275°C/5.0kg | ISO 1133 | 15.0 cm3/10min |
| Thermal performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 15 1 L BK |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 215 °C |
| melting temperature | DIN EN11357-1 | 220 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 192 °C |
Contact Us
Get App
Top