plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AS(SAN) Luran® 348Q INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodINEOS Barex/Luran® 348Q
Ball Pressure TestISO 2039-1160 MPa
Rockwell hardnessM-Scale77
thermal performanceTest ConditionTest MethodINEOS Barex/Luran® 348Q
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A86.0 °C
0.45MPa,AnnealedISO 75-2/B99.0 °C
Linear coefficient of thermal expansionMDISO 11359-27E-05 cm/cm/°C
thermal conductivityDIN 526120.17 W/m/K
Vicat softening temperatureISO 306/B50105 °C
mechanical propertiesTest ConditionTest MethodINEOS Barex/Luran® 348Q
bending strengthISO 178115 MPa
Tensile modulusISO 527-23600 MPa
Tensile strainBreak,23°CISO 527-22.5 %
tensile strengthYield,23°CISO 527-270.0 MPa
Electrical performanceTest ConditionTest MethodINEOS Barex/Luran® 348Q
Dielectric constant100HzIEC 602502.90
Dissipation factor1MHzIEC 602507E-03
100HzIEC 602504E-03
Surface resistivityIEC 60093>1.0E+15 ohms
Volume resistivityIEC 600931E+16 ohms·cm
Physical propertiesTest ConditionTest MethodINEOS Barex/Luran® 348Q
densityISO 11831.08 g/cm³
Melt Volume Flow Rate (MVR)220°C/10.0kgISO 113319.0 cm³/10min
Shrinkage rateISO 294-40.30to0.70 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.20 %
impact performanceTest ConditionTest MethodINEOS Barex/Luran® 348Q
Charpy Notched Impact Strength23°CISO 1791.5 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/A1.5 kJ/m²
Impact strength of simply supported beam without notch23°CISO 17914 kJ/m²
optical performanceTest ConditionTest MethodINEOS Barex/Luran® 348Q
Refractive indexISO 4891.569
transmissivity550nmASTM D1003>89.0 %
turbidityASTM D1003<1.0 %

Contact Us

Get App

Top