Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Plastomer, Ethylene-based IDI BMC Rosite 3550D IDI Composites International
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 210to320 J/m |
| Electrical performance | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 0.017to0.019 |
| dielectric constant | 60Hz | ASTM D150 | 5.15to5.35 |
| Volume resistivity | ASTM D257 | 2E+14 ohms·cm | |
| dielectric strength | ASTM D149 | 12 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.010to0.012 |
| dielectric constant | 1MHz | ASTM D150 | 4.80to5.00 |
| arc resistance | ASTM D495 | 170to180 sec |
| Mechanical properties | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| tensile strength | ASTM D638 | 41.4to48.3 MPa | |
| compressive strength | ASTM D695 | 145to152 MPa | |
| Flexural modulus | ASTM D790 | 11700to13100 MPa | |
| bending strength | ASTM D790 | 124to152 MPa |
| flammability | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.10 % |
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| density | ASTM D792 | 1.89 g/cm³ |
| Thermal performance | Test Condition | Test Method | IDI Composites International/IDI BMC Rosite 3550D |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 204 °C |
| Continuous use temperature | ASTM D794 | 149 °C |
Contact Us
Get App
Top