plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC G-3430R TEIJIN JAPAN

PANLITE®

machine,Mechanical components

Glass fiber reinforced,High rigidity,Good demolding performanc

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	151 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	148 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	6E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD	ISO 11359-2	2E-05 cm/cm/°C
RTI Elec	1.5mm	UL 746	130 °C
RTI Imp	1.5mm	UL 746	125 °C
RTI Str	1.5mm	UL 746	130 °C
Vicat softening temperature		ISO 306/B50	153 °C

mechanical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
Bending modulus		ISO 178	7100 Mpa
Bending modulus			ASTM D790/ISO 178	7260(74000) kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	162(1650) kg/cm²(MPa)[Lb/in²]
bending strength			ISO 178	160 Mpa
Charpy Notched Impact Strength		ASTM D256/ISO 179	118(12) kg·cm/cm(J/M)ft·lb/in
Elongation at Break		ASTM D638/ISO 527	2.5 %
Tensile modulus		ISO 527-2/1	8000 Mpa
Tensile modulus			ASTM D638/ISO 527	7950(81000) kg/cm²(MPa)[Lb/in²]
Tensile strain	Break	ISO 527-2/5	2.0 %
tensile strength	Break	ISO 527-2/5	105 Mpa
tensile strength			ASTM D638/ISO 527	108(1100) kg/cm²(MPa)[Lb/in²]

Electrical performance	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
Compared to the anti leakage trace index		IEC 60112	PLC 3
Dielectric strength		IEC 60243-1	35 KV/mm
Dissipation factor	1MHz	IEC 60250	9E-03
Dissipation factor		100Hz	IEC 60250	1E-03
Relative permittivity	100Hz	IEC 60250	3.50
Relative permittivity		1MHz	IEC 60250	3.50
Surface resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

other	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
characteristic			要求达-UL-940V-0级的电器电子元件

Physical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
density		ASTM D792/ISO 1183	1.43
Shrinkage rate	MD:4.00mm	Internal Method	0.020-0.20 %
Shrinkage rate		TD:4.00mm	Internal Method	0.30-0.50 %
Water absorption rate	23°C,24hr	ISO 62	0.12 %
Water absorption rate			ASTM D570/ISO 62	0.12 %

impact performance	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
Impact strength of simply supported beam without notch		ISO 179	35 kJ/m²

flammability	Test Condition	Test Method	TEIJIN JAPAN/G-3430R
UL flame retardant rating	0.43mm	UL 94	HB
		3.0mm	UL 94	V-1
		0.8mm	UL 94	V-2

Contact Us

Get App

Top