Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA/MXD6 N-252A MITSUBISHI ENGINEERING JAPAN
RENY™ 
Electronic and electrical、Automotive sector
High impact、High rigidity、Filler: Glass mineral、25% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
Impact strength of simply supported beam without notch23°CISO 17931 kJ/m²
Electrical performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
dielectric strength1.00mmIEC 60243-121 KV/mm
Volume resistivityIEC 600936E+15 ohms·cm
relative permittivity100HzIEC 602505.00
Dissipation Factor100HzIEC 602500.011
relative permittivity1MHzIEC 602505.00
Surface ResistivityIEC 600934E+15 ohms
Dissipation Factor1MHzIEC 602508E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112 V
Mechanical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
Tensile modulusISO 527-225700 Mpa
bending strengthISO 178289 Mpa
Tensile strain断裂ISO 527-211 %
Flexural modulusISO 17821900 Mpa
tensile strength 断裂ISO 527-2174 Mpa
flammabilityTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
UL flame retardant rating1.6mmUL 94HB
physical property Test ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
Shrinkage rate0.45 %
Melt volume flow rate275°C/2.16kgISO 11331.90 cm3/10min
Water absorption rate平衡,23°C,50%RHISO 621.1 %
饱和,23°CISO 620.24 %
melt mass-flow rate275°C/2.16kgISO 11332.6 g/10min
Thermal performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/N-252A
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B236 °C
1.8MPa,未退火，HDTISO 75-2/A227 °C
Linear coefficient of thermal expansionMDISO 11359-22E-05 cm/cm/°C
TDISO 11359-24E-05 cm/cm/°C

Contact Us

Get App

Top