Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP E130 JAPAN POLYPLASTIC
LAPEROS®
Insulation material
Corrosion resistance,Thermal stability,Weather resistance,High rigidity,high strength,damping,wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/E130 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-0 | |
| Linear coefficient of thermal expansion | 50℃,3.00mm,Flow | ASTM D696 | 6E-06 cm/cm/℃ |
| 53℃,垂直 | ASTM D696 | 0.000059 cm/cm/℃ | |
| UL flame retardant rating | 1.60mm | UL 94 | V-0 |
| 0.800mm | UL 94 | V-0 |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/E130 |
|---|---|---|---|
| Bending modulus | 3.20mm | ASTM D790 | 13700 MPa |
| bending strength | ASTM D790/ISO 178 | 189(MPa) kg/cm²(MPa)[Lb/in²] | |
| 3.20mm | ASTM D790 | 189 MPa | |
| Elongation at Break | 3.20mm | ASTM D638 | 2 % |
| Impact strength of cantilever beam gap | ASTM D256 | 107 J/m | |
| Tensile modulus | 3.20mm | ASTM D638 | 13700 MPa |
| tensile strength | 3.20mm | ASTM D638 | 127 MPa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/E130 |
|---|---|---|---|
| Arc resistance | ASTM D495 | 122 sec | |
| Compared to the anti leakage trace index | UL 746 | V | |
| Dielectric strength | 3.00mm | ASTM D149 | 25 kV/mm |
| Dissipation factor | 1E+6Hz | ASTM D150 | 0.037 |
| 1000Hz | ASTM D150 | 0.015 | |
| Surface resistivity | ASTM D257/IEC 60093 | 4.0E+16 Ω | |
| Volume resistivity | ASTM D257 | 4E+16 Ohm.cm | |
| ASTM D257/IEC 60093 | 4.0E+16 Ω.cm | ||
| ASTM D257 | 4E+16 ohms |
| other | Test Condition | Test Method | JAPAN POLYPLASTIC/E130 |
|---|---|---|---|
| characteristic | 尺寸稳定性良好.耐气候影响性能良好 | ||
| purpose | 电气/电子应用领域.汽车领域的应用 |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/E130 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.62 | |
| Rockwell hardness | M-Scale | ASTM D785 | 53 |
| Shrinkage rate | Flow | ASTM D955 | 0.02 % |
| Across Flow | ASTM D955 | -0.05 % |