Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT X4830 SABIC INNOVATIVE US
XENOY™
Automotive Applications
High mobility、High impact resistance、Dimensional stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/X4830 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 40 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 70.0 J |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 12 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 110 J | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 9.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 45 kJ/m² |
| Dart impact | -20°C,TotalEnergy | ASTM D3763 | 70.0 J |
| Impact strength of cantilever beam gap | 0°C | ISO 180/1A | 15 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/X4830 |
|---|---|---|---|
| ball-indentation hardness | H358/30 | ISO 2039-1 | 105 Mpa |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/X4830 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3200 Mpa | |
| elongation | 断裂4 | ASTM D638 | 140 % |
| tensile strength | 断裂 | ISO 527-2/5 | 60.0 Mpa |
| elongation | 断裂3 | ASTM D638 | 150 % |
| 屈服 | ASTM D638 | 4.1 % | |
| Tensile strain | 屈服 | ISO 527-2/5 | 4.1 % |
| Flexural modulus | 50.0mmSpan | ASTM D790 | 3100 Mpa |
| Tensile strain | 屈服 | ISO 527-2/50 | 4.2 % |
| tensile strength | 断裂 | ISO 527-2/50 | 55.0 Mpa |
| 屈服 | ISO 527-2/5 | 55.0 Mpa | |
| 屈服 | ISO 527-2/50 | 61.0 Mpa | |
| Tensile modulus | ASTM D638 | 3400 Mpa | |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 96.0 Mpa |
| ISO 178 | 90.0 Mpa | ||
| Flexural modulus | ISO 178 | 2900 Mpa | |
| Taber abraser | 1000Cycles,1000g,CS-17转轮 | 内部方法 | 30.0 mg |
| Tensile strain | 断裂 | ISO 527-2/5 | 120 % |
| tensile strength | 断裂4 | ASTM D638 | 60.0 Mpa |
| 屈服 | ASTM D638 | 56.0 Mpa | |
| 断裂3 | ASTM D638 | 60.0 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 110 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/X4830 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.70-0.90 % |
| melt mass-flow rate | 266°C/5.0kg | ASTM D1238 | 7.0 g/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.14 % |
| 饱和,23°C | ISO 62 | 0.42 % | |
| Melt volume flow rate | 265°C/5.0kg | ISO 1133 | 6.00 cm3/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/X4830 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 119 °C |
| vicat | -- | ISO 306/B120 | 135 °C |
| thermal conductivity | ISO 8302 | 0.20 W/m/K | |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 8.2E-05 cm/cm/°C |
| TD：-30to80°C | ISO 11359-2 | 9E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 125 °C |
| vicat | -- | ISO 306/B50 | 133 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 6E-05 cm/cm/°C |
| vicat | ASTM D152511 | 133 °C | |
| Linear coefficient of thermal expansion | MD：-30到80°C | ISO 11359-2 | 7.2E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Af | 97.0 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 106 °C |
Contact Us
Get App
Top