Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM SX-35 JAPAN POLYPLASTIC
DURACON®
Electronic and electrical
soft
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Charpy Notched Impact Strength23°CISO 179/1eA10 kJ/m²
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Rockwell hardnessM级ISO 2039-235
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
ColorNumberCF2001
Mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Wear factor0.060MPa,0.15m/sec7JISK7218700 10^-8mm³/N·m
Tensile modulusISO 527-2900 Mpa
coefficient of friction与钢-动态3JISK72180.52
Nominal tensile fracture strainISO 527-225 %
Wear factor0.49MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
bending strengthISO 17832.0 Mpa
Wear factor0.49MPa,0.30m/sec6JISK7218600 10^-8mm³/N·m
Flexural modulusISO 178800 Mpa
coefficient of frictionDynamic2JISK72180.45
Wear factor0.060MPa,0.15m/sec5JISK7218300 10^-8mm³/N·m
tensile strength ISO 527-226.0 Mpa
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Volume resistivityIEC 600939E+11 ohms·cm
dielectric strength3.00mmIEC 60243-125 KV/mm
Surface ResistivityIEC 600933E+13 ohms
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
UL flame retardant ratingUL 94HB
physical property Test ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Melt volume flow rate190°C/2.16kgISO 11335.60 cm3/10min
Water absorption rate23°C,24hrISO 620.70 %
densityISO 11831.24 g/cm³
melt mass-flow rate190°C/2.16kgISO 11336.0 g/10min
Thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/SX-35
Linear coefficient of thermal expansionTD：23to55°C内部方法1.5E-04 cm/cm/°C
MD：23到55°C内部方法1E-04 cm/cm/°C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A69.0 °C

Contact Us

Get App

Top