Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 ElectriPlast® EP-CF/66 Integral Technologies, Inc.
--
--
Filler, nickel plated carbon fiber
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 64 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 290 J/m |
| Electrical performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| Surface Resistivity | ESDSTM11.11 | 3.8E+02 ohms | |
| Volume resistivity | ASTM D257 | 82 ohms·cm | |
| ESDSTM11.11 | 38 ohms | ||
| StaticDecay | 内部方法 | 10 msec |
| Mechanical properties | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.4 % |
| Tensile modulus | ASTM D638 | 11900 MPa | |
| tensile strength | 断裂 | ASTM D638 | 111 MPa |
| Flexural modulus | ASTM D790 | 7830 MPa | |
| bending strength | ASTM D790 | 199 MPa |
| flammability | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| UL flame retardant rating | NoBurn | UL 94 | HB |
| physical property | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| density | ASTM D792 | 1.25 g/cm³ |
| Thermal performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/66 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | >250 °C |
| thermal conductivity | ASTM D5470 | 0.37 W/m/K | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.9E-05 cm/cm/°C |
Contact Us
Get App
Top