Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 SAXAMID™ 226F5RY01 SAX AUSTRIA
--
--
Filler, glass fiber reinforced material, 25%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 47 kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.0 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 48 kJ/m² |
Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 7.0 kJ/m² |
Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 8.0 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 56 kJ/m² |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 9.0 kJ/m² |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 48 kJ/m² |
Mechanical properties | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
Tensile strain | 断裂 | ISO 527-2/5 | 2.3 % |
tensile strength | ISO 527-2/5 | 125 MPa | |
Flexural modulus | ISO 178 | 7600 MPa | |
Tensile modulus | ISO 527-2/1 | 9600 MPa | |
bending strength | ISO 178 | 200 MPa |
Electrical performance | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
flammability | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
3.0mm | UL 94 | V-0 | |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 750 °C |
Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
Hot filament ignition temperature | 0.75mm | IEC 60695-2-13 | 725 °C |
physical property | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
viscosity number | H2SO4(硫酸)) | ISO 307 | 150 cm³/g |
density | ISO 1183 | 1.34 g/cm³ |
Thermal performance | Test Condition | Test Method | SAX AUSTRIA/SAXAMID™ 226F5RY01 |
---|---|---|---|
vicat | ISO 306/B120 | 248 °C | |
Heat distortion temperature | 1.8MPa,未退火,60.0mm跨距,HDT | ISO 75-2/A | 242 °C |
Contact Us
Get App
Top