Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK Edgetek™ PK-30GF/000 FCR NC Geon Performance Solutions
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 100 J/m |
| Suspended wall beam without notch impact strength | 23°C,3.20mm | ASTM D256 | 950 J/m |
| Mechanical properties | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0to4.0 % |
| tensile strength | ASTM D638 | 190 MPa | |
| Flexural modulus | ASTM D790 | 11000 MPa | |
| bending strength | ASTM D790 | 290 MPa |
| Electrical performance | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+15 ohms |
| flammability | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | 内部方法 | V-0 |
| physical property | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| density | ASTM D792 | 1.48 g/cm³ | |
| Shrinkage rate | 3.00mm | ISO 294-4 | 0.20to0.50 % |
| melt mass-flow rate | 400°C/2.16kg | ISO 1133 | 11 g/10min |
| Thermal performance | Test Condition | Test Method | Geon Performance Solutions/Edgetek™ PK-30GF/000 FCR NC |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 320 °C |
Contact Us
Get App
Top