Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AES KD100W UMG JAPAN
DIALAC®
--
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | UMG JAPAN/KD100W |
|---|---|---|---|
| Linear thermal expansion coefficient | MD | ISO11359-2 | 8E-05 cm/cm/°C |
| Coefficient of Linear Thermal Expansion | 流动 | ISO 11359-2 | 0.000080 cm/cm/℃ |
| UL flame retardant rating | 0.800mm | UL 94 | V-2 |
| Heat Deflection Temperature | 1.80MPa，未退火 | ISO 75-2/Af | 72.0 °C |
| 1.8MPa,未退火 | ISO75-2/Af | 72.0 °C |
| Hardness | Test Condition | Test Method | UMG JAPAN/KD100W |
|---|---|---|---|
| Rockwell Hardness | R计秤,23°C | ISO2039-2 | 104 |
| Physical | Test Condition | Test Method | UMG JAPAN/KD100W |
|---|---|---|---|
| Melt Volume flow Rate | 220°C/10.0kg | ISO1133 | 90.0 cm3/10min |
| Modeling Shrinkage | MD，23℃ | ISO 294-4 | 0.60 到 0.80 % |
| MD：23°C | ISO294-4 | 0.60到0.80 % | |
| Melt Volume flow Rate | 220℃/2.16 kg | ISO 1133 | 90.0 cm3/10min |
| Mechanical Properties | Test Condition | Test Method | UMG JAPAN/KD100W |
|---|---|---|---|
| Rockwell Hardness | 23℃ | ISO 2039-2 | 104 R 计秤 |
| Tensile Stress | 23℃ | ISO 527-2 | 43.0 Mpa |
| Flexural Strength | 23℃ | ISO 178 | 68.0 Mpa |
| Tensile Modulus | 23℃ | ISO 527-2 | 2280 Mpa |
| Flexural Modulus | 23°C | ISO178 | 2550 Mpa |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | 2.0 kJ/m² |
| Tensile Modulus | 23°C | ISO527-2 | 2280 Mpa |
| Tensile Stress | 23°C | ISO527-2 | 43.0 Mpa |
| Flexural Modulus | 23℃ | ISO 178 | 2550 Mpa |
| Flexural Stress | 23°C | ISO178 | 68.0 Mpa |
| Flammability | Test Condition | Test Method | UMG JAPAN/KD100W |
|---|---|---|---|
| Flame Rating | 3.0mm | UL94 | V-2 |
| 0.8mm | UL94 | V-2 |
Contact Us
Get App
Top