Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS H802 INEOS USA
Novodur®
Application in the automo、Automotive External Parts
heat-resisting、High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | INEOS USA/H802 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 15 kJ/m² |
| -30°C | ISO 179 | 7.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 80 kJ/m² |
| 23°C | ISO 179 | 100 kJ/m² |
| Mechanical properties | Test Condition | Test Method | INEOS USA/H802 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2700 Mpa | |
| Tensile strain | 断裂,23°C | ISO 527-2 | >15 % |
| bending strength | ISO 178 | 80.0 Mpa | |
| tensile strength | 屈服,23°C | ISO 527-2 | 51.0 Mpa |
| Flexural modulus | ISO 178 | 2700 Mpa | |
| Tensile strain | 屈服,23°C | ISO 527-2 | 2.8 % |
| ball-indentation hardness | ISO 2039-1 | 115 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS USA/H802 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 3.10 |
| Dissipation Factor | 100Hz | IEC 60250 | 6E-03 |
| dielectric strength | 1.50mm | IEC 60243-1 | 34 KV/mm |
| relative permittivity | 1MHz | IEC 60250 | 3.00 |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.010 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| physical property | Test Condition | Test Method | INEOS USA/H802 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.40-0.70 % | |
| density | ISO 1183 | 1.05 g/cm³ | |
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 8.00 cm3/10min |
| Thermal performance | Test Condition | Test Method | INEOS USA/H802 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,退火，HDT | ISO 75-2/A | 101 °C |
| vicat | ISO 306/B50 | 109 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 8E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,Annealed，HDT | ISO 75-2/B | 107 °C |
Contact Us
Get App
Top