Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Kingfa ABP-2119 Kingfa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm,注塑 | ASTM D256 | 550 J/m |
| -30°C,3.20mm,注塑 | ASTM D256 | 60 J/m |
| hardness | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 65 |
| Mechanical properties | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| elongation | 断裂,23°C,注塑 | ASTM D638 | 400 % |
| bending strength | 23°C,注塑 | ASTM D790 | 23.0 MPa |
| tensile strength | 23°C,注塑 | ASTM D638 | 18.0 MPa |
| Flexural modulus | 23°C,注塑 | ASTM D790 | 800 MPa |
| flammability | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| UL flame retardant rating | 3.20mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 9.0 g/10min |
| Shrinkage rate | MD：23°C | ASTM D955 | 1.4to1.6 % |
| density | ASTM D792 | 0.900 g/cm³ |
| Thermal performance | Test Condition | Test Method | Kingfa/Kingfa ABP-2119 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,6.40mm,注塑，HDT | ASTM D648 | 105 °C |
| 1.8MPa,未退火,6.40mm,注塑，HDT | ASTM D648 | 52.0 °C |
Contact Us
Get App
Top