Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK TECAPEEK® PVX ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 170 J/m |
| Supplementary Information | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| limiting pv value | 25000to30000 |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 85 |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+5到1.0E+8 ohms | |
| Volume resistivity | 23°C | ASTM D257 | 1.4E+05 ohms·cm |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 207 MPa |
| compressive strength | 23°C | ASTM D695 | 152 MPa |
| coefficient of friction | ASTM D1894 | 0.19to0.21 | |
| Flexural modulus | 23°C | ASTM D790 | 9650 MPa |
| Wear factor | 0.00125to0.00150 in/min | ||
| tensile strength | 屈服,23°C | ASTM D638 | 119 MPa |
| elongation | 断裂,23°C | ASTM D638 | 2.5 % |
| flammability | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| density | ASTM D792 | 1.48 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECAPEEK® PVX |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.35mm，HDT | ASTM D648 | 277 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-06 cm/cm/°C |
| melting temperature | 334 °C | ||
| Continuous use temperature | 260 °C |
Contact Us
Get App
Top