Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC/PBT X2500UV-BK1D355BZDD SABIC INNOVATIVE US

XENOY™

Automotive components,Electronic and electrical components

High impact,No fill

Plastic Datasheets

hardness	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Ball Pressure Test	H358/30	ISO 2039-1	95.0 Mpa

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Ball Pressure Test	125°C	IEC 60695-10-2	通过
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	108 °C
		1.8MPa,Unannealed,64.0mmSpan11	ISO 75-2/Af	108 °C
		1.8MPa,Unannealed,64.0mmSpan10	ISO 75-2/Af	108 °C
		0.45MPa,Unannealed,64.0mmSpan10	ISO 75-2/Bf	126 °C
		0.45MPa,Unannealed,64.0mmSpan11	ISO 75-2/Bf	126 °C
Linear coefficient of thermal expansion	MD:-40to40°C	ASTME831	8E-05 cm/cm/°C
		TD:-40to40°C	ASTME831	8.5E-05 cm/cm/°C
		MD:23to80°C	ISO 11359-2	8.2E-05 cm/cm/°C
		TD:23to80°C	ISO 11359-2	8.7E-05 cm/cm/°C
thermal conductivity		ISO 8302	0.18 W/m/K
Vicat softening temperature	--	ASTMD152511	135 °C
		--	ISO 306/B120	136 °C
		--	ASTMD152512	135 °C
		--	ISO 306/A50	145 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Bending modulus	--7	ISO 178	2150 Mpa
		--6	ISO 178	2150 Mpa
		50.0mmSpan5	ASTM D790	2150 Mpa
		50.0mmSpan6	ASTM D790	2150 Mpa
		--	ASTM D790	2100 Mpa
bending strength	--6,7	ISO 178	80.0 Mpa
		Yield,50.0mmSpan6	ASTM D790	79.0 Mpa
		Yield,50.0mmSpan5	ASTM D790	79.0 Mpa
		--7,8	ISO 178	80.0 Mpa
		--	ASTM D790	79.0 Mpa
elongation	Break	ASTM D638	100 %
		Break4	ASTM D638	80 %
		Break5	ASTM D638	80 %
		Yield	ASTMD638	5.0 %
		Yield5	ASTM D638	5.0 %
		Yield4	ASTM D638	5.0 %
		Break	ISO 527-2/50	70 %
Taber abraser	1000Cycles,1000g,CS-17Wheel	Internal Method	20.0 mg
Tensile modulus	--4	ASTM D638	2200 Mpa
		--3	ASTM D638	2200 Mpa
		--	ISO 527-2/1	2200 Mpa
tensile strength	Break4	ASTM D638	55.0 Mpa
		Break5	ASTM D638	55.0 Mpa
		Yield	ASTM D638	53.0 Mpa
		Yield	ISO 527-2/50	57.0 Mpa
		Break	ISO 527-2/50	56.0 Mpa
		Yield5	ASTM D638	56.0 Mpa
		Yield4	ASTM D638	56.0 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Dielectric strength	3.20mm,in Oil	IEC 60243-1	17 KV/mm
Dissipation factor	1MHz	IEC 60250	0.020
		50Hz	IEC 60250	2E-03
		60Hz	IEC 60250	2E-03
Relative permittivity	60Hz	IEC 60250	3.30
		50Hz	IEC 60250	3.30
		1MHz	IEC 60250	3.10
Surface resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+14 ohms·cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
melt mass-flow rate	265°C/2.16kg	ASTM D1238	9.0 g/10min
Melt Volume Flow Rate (MVR)	265°C/1.2kg	ISO 1133	4.00 cm3/10min
Shrinkage rate	TD3	Internal Method	0.50-0.80 %
		TD2	Internal Method	0.50-0.80 %
		MD3	Internal Method	0.50-0.80 %
		MD:3.20mm	Internal Method	0.50-0.80 %
		MD2	Internal Method	0.50-0.80 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20 %
Water absorption rate		Saturation,23°C	ISO 62	0.70 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Charpy Notched Impact Strength	23°C	ISO 179/1eA	50 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	30 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	60.0 J
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂

flammability	Test Condition	Test Method	SABIC INNOVATIVE US/X2500UV-BK1D355BZDD
Burning wire flammability index	2.7mm	IEC 60695-2-12	750 °C
UL flame retardant rating	1.5mm	UL 94	HB

Get App

Top