Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS P2HE Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/P2HE |
|---|---|---|---|
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 7.00 cm3/10min |
| density | ISO 1183 | 1040 kg/m3 |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/P2HE |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-1 | 2.3 % |
| Nominal fracture strain | ISO 527-1 | 0.00 % | |
| Tensile modulus | ISO 527-1 | 2500 MPa | |
| Tensile stress | 屈服 | ISO 527-1 | 44.0 MPa |
| Electrical performance | Test Condition | Test Method | Ineos ABS/P2HE |
|---|---|---|---|
| relative permittivity | 1000Hz | IEC 60250 | 2.90 |
| dielectric strength | IEC 60243-1 | 34 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.00 |
| Volume resistivity | IEC 60093 | 1E+13 ohm.m | |
| Dielectric loss | 100Hz | IEC 60250 | 0.0090 |
| 1000Hz | IEC 60250 | 0.0070 |
| Thermal performance | Test Condition | Test Method | Ineos ABS/P2HE |
|---|---|---|---|
| vicat | 50℃/h 50N | ISO 306 | 99.0 ℃ |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000090 cm/cm℃ | |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 100 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 96.0 ℃ |
Contact Us
Get App
Top