plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A3 RV0 BK9005/JJ NILIT SUZHOU
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Ball Pressure Test125°CIEC 60695-10-2Pass
165°CIEC 60695-10-2Pass
Continuous use temperatureIEC 60216130 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B185 °C
1.8MPa,UnannealedISO 75-2/A85.0 °C
mechanical propertiesTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Tensile modulus23°CISO 527-23400 Mpa
Tensile strainBreak,23°CISO 527-28.0 %
tensile strengthYield,23°CISO 527-285.0 Mpa
Electrical performanceTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Compared to the anti leakage trace index3.20mm,SolutionAIEC 60112PLC 0
Dielectric strength2.00mmIEC 60243-125 KV/mm
Needle flame test2.00mmIEC 60695-11-5Pass
1.00mmIEC 60695-11-5Pass
Surface resistivityIEC 600931E+13 ohms
Volume resistivity23°CIEC 600931E+15 ohms·cm
Physical propertiesTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Shrinkage rateTD:23°CISO 294-41.6 %
MD:23°CISO 294-41.5 %
Water absorption rateSaturation,23°CISO 626.0 %
23°C,24hrISO 621.4 %
impact performanceTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
flammabilityTest ConditionTest MethodNILIT SUZHOU/A3 RV0 BK9005/JJ
Burning wire flammability index0.8mmIEC 60695-2-12960 °C
3.2mmIEC 60695-2-12960 °C
Extreme Oxygen IndexISO 4589-233 %
Hot filament ignition temperature3.2mmIEC 60695-2-13775 °C
0.8mmIEC 60695-2-13775 °C
UL flame retardant rating3.2mmUL 94V-0
0.8mmUL 94V-0
1.6mmUL 94V-0
0.40mmUL 94V-0